VENTUS PRO PVS air handling units - the units are made of a steel or aluminum frame, to which "sandwich" panels made of rock wool, covered with a metal sheet on both sides, are attached. There are 6 types of units available: PVS, PVS H, PVS HY, PVS PO, PVS PCR, PVS HX. Depending on the type and configuration of the device, they can be used:
Air flow of air handling units:
VENTUS PRO PVS RO ROOF TOP is able to carry out the cooling function in the temperature range of 15°C / 50°C and the
heating function in the range of -20°C / 25°C with the direct expansion heat pump system. In winter,
defrost scenario is managed with a simultaneous defrosting algorithm to ensure that the device will
continue to operate even during defrost during severe winter conditions.
FVS FCU is designed as a ceiling concealed hydronic water duct fan coil unit. It has modern appearance, compact structure, low noise and large cooling (and optionally heating) capacity. A fan coil unit (FCU) contains a fan which draws the air in a space into the unit then blows it over a cold or hot coil. The air comes out of the FCU either chilled or warmer than before. Concealed ceiling type fan coils are produced in 2 types as standard and high pressure.
Check and download the files related to the product.
Check the facilities that use our solutions.
In our offer you will find modular VENTUS PRO air handling units. These are devices recommended for technological and industrial applications, as well as for ventilation of swimming pools.
We offer three product lines with the following extensions: PVS, PVS PO, PVS HY. Here you can check the technical details. Each of them has different characteristics
parameters and is intended for specific applications. Check which of them meets your expectations.
If you need support with selection a modular air handling unit, we are at your disposal.
The air handling unit is the heart of any ventilation system. Its task is to ensure air exchange and treatment. The main functions of such devices include: stamping, filtering, heating, cooling, moisturizing, drying.
Particular types of air handling units can perform all these activities or only selected ones. For example, devices designed for use in swimming pools, which you will find in our offer, are primarily designed to dry the air. Other types of devices, on the other hand, may focus on humidifying, cooling or heating it.
Modular air handling units are installed primarily in industrial and technological facilities. Such devices can be used as indoor or outdoor units - depending on the installation location. Internal models are mounted in special machinery rooms, while external models are usually installed on the roof of the building.
The modular design of the VENTUS PRO air handling units, which we present in this category, facilitates their transport and installation. They can be installed even in tall buildings or hard-to-reach machinery rooms.
Modular air handling units are available in special executions, e.g. swimming pool or hygienic. Devices designed for use in swimming pools stand out systems resistant to corrosion, moisture and chlorine.
Hygienic units enable control of their cleanliness as well as washing and disinfection.
They are usually intended for rooms with special requirements, for example operating rooms, laboratories or production halls in pharmaceutical plants.
English
Polski
Germany
LATAM
Bulgaria
Estonia
France
Hungary
India
Italy
Kazakhstan
Romania
Czech Republic
Ukraine
United Arab Emirates
Latvia
Lithuania
United States of America
eShop 
Turkey
