American VENTUS

Air handling units
American VENTUS AHUs offer convenient, compact, lightweight, air handling units, free of thermal bridges and air leakage as a result of our innovative monocoque casing design.


AVS

from 800 CFM
to 38 000 CFM
in total capacity
  • KInd of unit: modular AHU’s
  • Capacity – from 800 CFM to 38 000 CFM
  • Energy efficiency: energy recovery system: cross-flow plate, energy wheel
  • Placing: floor mounted unit
AVS LITE

from 800 CFM
to 4 000 CFM
in total capacity
  • KInd of unit: modular AHU’s
  • Capacity – from 800 CFM to 4 000 CFM
  • Energy efficiency: energy recovery system: cross-flow plate, energy wheel
  • Placing: floor mounted unit
AVS VERTICAL

from 800 CFM
to 4 000 CFM
in total capacity
  • KInd of unit: modular AHU’s
  • Capacity – from 800 CFM to 4 000 CFM
  • Placing: floor mounted unit
Design
The VENTUS air handling units are made of baked polyurethane panels covered with AluZinc sheets (AZ 150). In addition, the structures are reinforced by aluminum structural pillars, a steel cage of the fan section, as well as steel base frames.

The American VENTUS air handling units have an extensive sealing system. These devices are equipped with sealing fins which ensure labyrinthine seals, and thermal inserts that guarantee the breaking of all thermal bridges.

Casing skin
High rigidity and durability for the AHU structure.
Low absorption of heat radiation and UV.
Perfect resistance to weather conditions.
Aluminum structural posts
Posts with an additional sealing fin that ensures labyrinth sealing – currently the most effective solution on the market.
Thermal break as standard - ensures no condensation outside the AHU.
Convenient
Easy transport.
Great profile resistance to deflection.
Easy section assembly.

Fan section cage
high longitudinal stiffness of the structure
Ergonomic inspection panel lock
Perfect ergonomics with quick open-close integrated handle and hinge function.
Energy efficiency
The American VENTUS AVS AHUs can be equipped with various key components: heat wheels, cross-flow plates, glycol heat exchangers, heating coils, and cooling coils.
AIR-TO-AIR ENERGY Recovery
- Total energy wheels constructed with Aluminum, coated with non-toxic, non-corrosive Silica gel.
- Aluminum crossflow plates with a very high separation of the stream of supply and exhaust air (99.9%).


Heaters
Hot water heating coils.
Resistant electric heaters.
DX heating coils.
Cooling coils
Chilled water cooling coils
DX cooling coils

Controls
For management of our American VENTUS air handling units we recommend our control application based on BACnet connection, supporting all advanced control functions and variable ways of external communication including integration with Building Management Systems.
Control
• Variable Frequency Drives as standard
• Disconnects and Breakers
• Damper Actuators avalaiable
• Magnahelic Filter guages avalaiable
• EC Motors avalaiable
Rooftop application

The American VENTUS air handling units are adapted to rooftop applications. Devices are equipped, among others in: roof and curb ready reails.

Sectional roof
Prevents water penetration during service.
Additional weather protection.
Variable intake configurations
Top, bottom and side intake options
End – optional full face intake damper available units

Dampers:
- gear system for even distribution of the torque
- extruded aluminum construction
- low leakage
- double wall blade construction
Curb ready rails
Design - overhangs the side of the curb to avoid the need of flashing.
Integrated lifting lugs.
Design - overhangs the side of the curb to avoid the need of flashing Integrated lifting lug
End, top, bottom and side discharge options.
Optional discharge dampers and full end discharge dampers available.
Selection software
ClimaCAD OnLine 4 (CCOL4) is the authorial VTS selection software.

The software uses the latest technologies and programming platforms. The biggest advantage of this system is the fact that the it is available from anywhere in the world, all you need is a device with a web browser and access to the Internet.

The software includes modules for the optimal selection of units in terms of parametric and cost as well as innovative generators of Revit objects or 2D and 3D dwg files. Generators provide properly immediate availability of .rfa and .dwg files for any units configuration. The system also offers the ability to automatically generate a submittal file of selected units. Full parameters are available in .pdf, .html and .rfa files.

Customized configuration
User friendly interface
Fast&Easy selection
Integrated with CRM, ERP, WMA system
Technical support
Selection software
ClimaCAD Online 4 (CCOL4)
 
Help
VTS Service Customer Service Centre:
801 080 073

Photos

Check where the American VENTUS devices work

Trust our proven solutions
For additional information please check the detailed documentation for VTS devices