Compact air handling units - slider

Compact air handling units
VENTUS Compact - suspended

VENTUS Compact - <strong>suspended</strong> - Compact air handling units
VENTUS Compact - <strong>suspended</strong> - Compact air handling units

The suspended VENTUS Compact air handling units are energy-saving units equipped with a counter-flow hexagonal recuperator, EC motors, Mini-Pleat filters and integrated automation (Plug&Play).

  • Capacity: from 150 m3/h to 3,300 m3/h
  • Energy recovery: up to 90% recovery efficiency
  • Placing: suspended units

VENTUS Compact - <strong>suspended</strong> - Compact air handling units 1 VENTUS Compact - <strong>suspended</strong> - Compact air handling units 2 VENTUS Compact - <strong>suspended</strong> - Compact air handling units 3 VENTUS Compact - <strong>suspended</strong> - Compact air handling units 4 VENTUS Compact - <strong>suspended</strong> - Compact air handling units 5 VENTUS Compact - <strong>suspended</strong> - Compact air handling units 6
VENTUS Compact - <strong>suspended</strong> - Eurovent
VENTUS Compact - <strong>suspended</strong> - ISO 9001 14001
VENTUS Compact - <strong>suspended</strong> - CE
Unit size

Design

The compact air handling units in the suspended version are intended for installation in the space under the ceiling.

The units are made of mineral wool insulation panels covered with Aluzinc sheet (AZ 150). The panels are attached to a steel supporting structure that ensures the rigidity of the entire unit.

The units are equipped with:
  • counter-flow hexagonal recuperator
  • EC motors
  • MINI - PLEAT filters
  • multifunctional controls

The units are factory assembled, configured and ready for operation immediately after connecting (Plug&Play).

CASING
Panels filled with mineral wool, enclosed with steel sheet on both sides.
Casing parameters according to EN 1886: T2, TB3, L1, D1, F9.
AZ 150 Aluzinc corrosion protection.
MINI-PLEAT FILTERS
Highly absorbent compact filters with a large surface.
Supply air - class EU 7
Extract air - class EU 5

Energy efficiency

The compact air handling units in the suspended version are characterised by high heat recovery efficiency, which is as high as 90%.

In addition, the unit is equipped with energy-saving EC motors, as well as multifunctional controls, which, when properly configured, allows for savings resulting from a reduction in electricity demand.

EC motors
Efficient, quiet fan with low vibration levels, with class IE4 EC motor.
Energy recovery
Powerful counter-flow hexagonal heat exchanger with bypass.
Recovery efficiency up to 90%

Controls

The compact air handling units in the suspended version are equipped with multifunctional controls integrated with the device (Plug & Play).

Controls enables remote control of the unit operation through visualisation or the remote HMI Advance desktop.


Visualisation of the unit operation
VTS factory visualisation enables monitoring as well as control of the unit operation.
Controller
Multifunctional controls integrated into the unit casing - configured and ready to work.
Conrols in VENTUS Compact units is based on the uPC3 controller.
Factory setting of parameters
The factory settings of the unit parameters in the delivered units are consistent with the parameters in the unit selection technical data sheet.
Selection software
ClimaCAD OnLine 4 (CCOL4) - a software for selecting air handling and conditioning units
certified by Eurovent.
VENTUS Compact - <strong>suspended</strong> - VENTUS Compact - <strong>suspended</strong>, Compact air handling units, Selection software

ClimaCAD OnLine 4 (CCOL4) is a proprietary VTS device selection software. The software uses the latest technologies and programming platforms. The system is available from anywhere in the world, any device with a web browser and access to the Internet is sufficient.


The software includes both modules for optimal device selection in terms of parameters and costs as well as innovative generators of Revit objects or 2D and 3D dwg files. The generators ensure immediate availability of .rfa and .dwg files for any device configuration. The system offers the ability to automatically generate descriptive and parametric technical specifications of selected devices. Full device parameters are available in .pdf, .html as well as .rfa files.

Unlimited number of configurations
Friendly user interface
Easy and simple selection
Integration with CRM, ERP, WMA systems
Files to download

Check and download the files related to the product.

References

Check the facilities that use our solutions.

Technical support
Selection software
ClimaCAD Online 4 (CCOL4)
 
Help
VTS Service Customer Service Centre:
 
Trust our proven solutions
For additional information please check the detailed documentation for VTS devices